AAP Industries Buttweld Equal Tee (X-Stg) Butt Welding Fittings

Buttweld X-STG ASTM A234 WPB ANSI B16.9 Equal Tee
General Information

Buttweld X-STG ASTM A234 WPB ANSI B16.9 Equal Tee
AAP CODE	IMPERIAL SIZE	A	B	C	WALL THICK- NESS	APPROX. KG/PC
WT15X	1/2	21.3	13.8	25.0	3.7	0.2
WT20X	3/4	26.7	18.9	28.4	3.9	0.3
WT25X	1	33.4	24.3	38.1	4.6	0.4
WT32X	1 1/4	42.2	32.5	47.8	4.9	0.8
WT40X	1 1/2	48.3	38.1	57.2	5.1	1.1
WT50X	2	60.3	49.2	63.5	5.5	1.7
WT65X	2 1/2	73.0	59.0	76.2	7.0	3.0
WT80X	3	88.9	73.7	85.9	7.6	4.3
WT94X	4	114.3	97.2	104.6	8.6	7.3
WT96X	6	168.3	146.4	142.7	11.0	19.0
WT98X	8	219.1	193.7	304.8	12.7	30.34

Buttweld STD ASTM A234 WPB ANSI B16.9 Dimensional Tolerance
ALL FITTINGS	90º & 45º ELBOWS	TEES	REDUCERS	CAPS
NOMINAL PIPE SIZE (NPS)	OUTSIDE DIAMETER AT BEVEL	INSIDE DIAMETER AT END	WALL THICKNESS	CENTRE TO END	CENTRE TO END	OVERALL LENGTH	OVERALL LENGTH
1/2” - 2 1/2”	+ 1.5MM	+0.8MM	NOT	+2.0MM	+2.0MM	+2.0MM	+ 3.0MM
1/2” - 2 1/2”	- 0.7MM	- 0.8MM	LESS THAN	- 2.0MM	- 2.0MM	- 2.0MM	- 3.0MM
3” - 4”	+ 1.6MM	+1.5MM	LESS THAN	- 2.0MM	- 2.0MM	- 2.0MM	- 3.0MM
3” - 4”	- 1.6MM	- 1.5MM	LESS THAN	- 2.0MM	- 2.0MM	- 2.0MM	+6.3MM
5” - 8”	+2.4MM		LESS THAN	- 2.0MM	- 2.0MM	- 2.0MM	+6.3MM
5” - 8”	- 1.6MM		LESS THAN	- 2.0MM	- 2.0MM	- 2.0MM	- 6.3MM
10” - 18”	+4.0MM	+3.2MM	LESS THAN	- 2.0MM	- 2.0MM	- 2.0MM	- 6.3MM
10” - 18”	- 3.2MM	- 3.2MM	LESS THAN	- 2.0MM	- 2.0MM	- 2.0MM	- 6.3MM
20”- 24”	+6.4MM	+4.8MM	LESS THAN	- 2.0MM	- 2.0MM	- 2.0MM	- 6.3MM
20”- 24”	- 4.8MM	- 4.8MM	LESS THAN	- 2.0MM	- 2.0MM	- 2.0MM	- 6.3MM

Buttweld SGP JIS B 2311 Dimensional Tolerance
ALL FITTINGS	90º & 45º ELBOWS	TEES	REDUCERS
NOMINAL PIPE SIZE (NPS)	OUTSIDE DIAMETER AT BEVEL	INSIDE DIAMETER AT END	WALL THICKNESS	CENTRE TO END	CENTRE TO END	OVERALL LENGTH
OUTSIDE DIAM-	+2.0MM	+2.0MM	+NOT SPECIFIED	+2.0MM	+2.0MM	+2.0MM
ETER AT BEVEL	-2.0MM	-2.0MM	-15.00%	-2.0MM	-2.0MM	-2.0MM
3” - 4”	+2.5MM	+2.5MM	-15.00%
	-2.5MM	-2.5MM	-15.00%
5” - 8”	+3.5MM	+3.5MM	-15.00%	+3.5MM	+3.2MM	+3.2MM
	-3.5MM	-3.5MM	-15.00%	-3.5MM	-3.2MM	-3.2MM

Buttweld STD ASTM A234 ANSI B16.9 Welding End Preparation to ANSI B16.25
WALL THICKNESS	WELDING AND PREPARATION
LESS THAN T (*)	CUT SQUARE OR SLIGHTLY CHAMFERED AT MANUFACTURER’S OPTION.
T (*) TO 22 INCLUDED	PLAIN BEVEL AS SKETCH (A) 37.5°±2.5°	EL OR W	ROUGHT IRON;
MORE THAN 22	COMPOUND BEVE	L AS SKETCH (B)	EL OR W	ROUGHT IRON;
30°		Max	EL OR W	ROUGHT IRON;
NOTE :- ( * )	T = 5MM FOR CARBON, FERRITIC A	LLOY STE	EL OR W	ROUGHT IRON;
	T = 4MM FOR AUSTENITIC ALL		OY STEEL	ROUGHT IRON;

Pressure / Temperature Ratings
SEAMLESS CARBON STEEL PIPE. GRADE B
Nominal Size DN mm	Temp C			-29 to 38	205	260	350	370	400	430	450
Nominal Size DN mm	Wall Thickness	Sched. No.	mm	MAXIMUM ALLOWABLE PRESSURE / TEMPERATURE RATINGS IN kPa (TO ANSI/ASME B31.3a)
15	STD	40	2.77	34416	34416	32528	29255	28910	22372	18589	14972
Nominal Size DN mm	XS	80	3.73	48092	48092	45446	40878	40396	31260	25969	20918
20	STD	40	2.87	28070	28070	26526	23860	23578	18245	15158	12209
Nominal Size DN mm	XS	80	3.91	39418	39418	37247	33506	33106	25617	21283	17142
25	STD	40	3.38	26251	26251	24804	22310	22048	17060	14173	11417
Nominal Size DN mm	XS	80	4.55	36283	36283	34285	38040	30474	23584	19595	15785
32	STD	40	3.56	21614	21614	20421	18369	18155	14049	11672	9404
Nominal Size DN mm	XS	80	4.85	30178	30178	28518	25651	25348	19616	16295	13125
40	STD	40	3.68	19444	19444	18375	16529	16329	12636	10500	8454
Nominal Size DN mm	XS	80	5.08	27402	27402	25900	23295	23019	17811	14800	11919
50	STD	40	3.91	16378	16378	15468	13925	13759	10645	8847	7124
Nominal Size DN mm	XS	80	5.54	23653	23653	22351	20105	19871	15378	12774	10287
65	STD	40	5.16	17914	17914	16929	15227	15048	11644	9674	7793
Nominal Size DN mm	XS	80	7.01	24818	24818	23447	21097	20849	16129	13401	10797
80	STD	40	5.49	15558	15558	14696	13222	13063	10108	8399	6766
Nominal Size DN mm	XS	80	7.62	21986	21986	20780	18693	18472	14290	11871	9563
100	STD	40	6.02	13187	13187	12464	11210	11079	8571	7124	5739
Nominal Size DN mm	XS	80	8.56	19058	19058	18010	16198	16012	12388	12094	8289
125	STD	40	6.55	11561	11561	10921	9825	9708	7517	6243	5038
Nominal Size DN mm	XS	80	9.53	17060	17060	16122	14503	14331	11093	9212	7421
150	STD	40	7.11	10500	10500	9928	8924	8819	6828	5670	4568
Nominal Size DN mm	XS	80	10.97	16474	16474	15571	14007	13842	10707	8895	7165
200	STD	40	8.18	9246	9246	8737	7855	7765	6008	4995	4024
Nominal Size DN mm	XS	80	12.7	14572	14572	13766	12388	12237	9474	7868	6338
250	STD	40	9.27	8385	8385	7923	7131	7048	5450	4527	3652
Nominal Size DN mm	XS		12.7	11596	11596	10955	9853	9736	7538	6263	5043
300	STD		9.53	7241	7241	6842	6153	6084	4706	3914	3149
Nominal Size DN mm	XS		12.7	9722	9722	9191	8268	8165	6318	5250	4230
350	STD	30	9.53	6580	6580	6222	5595	5533	4279	3555	2866
Nominal Size DN mm	XS		12.7	8833	8833	8351	7510	7421	5739	4768	3845
400	STD	30	9.53	5746	5746	5429	4885	4830	3734	3100	2501
Nominal Size DN mm	XS	40	12.7	7703	7703	7283	6545	6470	5009	4162	3349
450	STD		9.53	5099	5099	4816	4334	4286	3314	2756	2219
Nominal Size DN mm	XS		12.7	6835	6835	6456	5808	5739	4437	3686	2969
500	STD	20	9.53	4582	4582	4327	3893	3852	2976	2474	1991
Nominal Size DN mm	XS	30	12.7	6139	6139	5801	5216	5154	3989	3314	2666
600	STD	20	9.53	3810	3810	3603	3238	3197	2474	2060	1660
Nominal Size DN mm	XS		12.7	5097	5097	4816	4334	4286	3314	2756	2219

Your name *

Your email *

Subject: *

Enquiry *

Irrigation Unit Conversions

Convert a given value and unit to different unit type. Conversions are available for flow rate, area, distance, time, volume, pressure, power, precipitation, salinity, and speed.

Click here to see unit descriptions.

Flow Rate:
		to

Area:
		to

Distance:
		to

Time:
		to

Volume:
		to

Pressure:
		to

Power:
		to

Precipitation (Water Application) Rate:
		to

Salinity:
		to

Speed:
		to

Reference: Washington State University

P Angularity
NOMINAL PIPE SIZE (NPS)	OFF ANGLE (Q)	OFF PLANE (P)
1/2 TO 2 1/2	1.0MM	2.0MM
3 TO 3 1/2	2.0MM	4.0MM
4	3.0MM	5.0MM
5 - 8	3.0MM	6.0MM
10 - 18	4.0MM	10.0MM
20 - 24	5.0MM	10.0MM

AAP Industries Buttweld Equal Tee (X-Stg)

[3] BUTTWELD

Specifications

Buttweld Specifications Standard Weight (Std)

Specifications

BUTTWELD [3]

Irrigation Unit Conversions

Payment options